Coal & biomass lab analyzers · tender authorization, engineer training & model evidence on request
Industry application
Feedstock, fuel and carbon-content testing for process and utility control.
Chemical and fertilizer producers test coal and gas feedstock carbon content, plus boiler fuel quality and process additives.
Laboratory methods may follow ASTM, ISO or in-house SOPs; the purchase must document which standards each model covers.
These sites often already operate analytical instruments, so integration and documentation quality weigh heavily.
A planning template, not a fixed bundle. Final scope depends on sample types, throughput, target standards, utilities and local acceptance requirements.
Carbon, hydrogen and nitrogen in ~300 s with 36-position autosampler.
RI-C5800Isoperibol gross calorific value, ≤11 min fast mode with automatic oxygen fill.
RI-MF12001200 °C programmable chamber for ashing, LOI and fusion preparation.
RI-S32020-position autosampler, 0.01–40% sulfur, coulometric titration.
Method references describe the standards a model is listed against; the edition, clause and acceptance criteria in your tender are confirmed before order.
Issued to a partner who has passed our engineer training exam and been approved for the model list and territory. These are manufacturer documents, not a statement that a specific national approval has been granted.
Remote instrument training is free of charge and available for your team before or after delivery. Engineers who pass the exam at each level receive a certificate with a verification ID; a partner can then apply for authorization to perform first-line installation, commissioning and after-sales support in its territory, subject to our review.
Training, exam & partner authorizationA common starting configuration for chemical is RI-CHN2200 (CHN Elemental Analyzer), RI-C5800 (Automatic Bomb Calorimeter), RI-MF1200 (Programmable Muffle Furnace), RI-S320 (Coulometric Sulfur Analyzer). The final list depends on sample types, daily volume, target standards and available utilities — send those details for a written configuration review.
Yes. We can issue a manufacturer's authorization letter naming the tender reference and buyer, plus a technical and commercial responsibility statement, datasheets, acceptance-test procedure, training program and certificate samples. The exact document set must be confirmed against your tender clauses before submission.
We recommend a structured program: instrument operation and maintenance, method and calibration control, then competency assessment. Remote training is available for the whole team; on-site installation and training are quoted per project. Each participant who completes the program receives a certificate with a verification ID.
The methods most often named are ASTM D5373 (CHN); ISO 1928 / ASTM D5865 (calorific value); ISO 351 / ASTM D4239 (sulfur); ISO 1171 / ASTM D3174 (ash). Method compatibility is confirmed per model and per configured instrument — we do not treat a standard listed on a page as a blanket accreditation claim.