Coal & biomass lab analyzers · tender authorization, engineer training & model evidence on request
Industry application
Coal blend control, coke quality and sulfur reporting for coking operations.
Coking plants buy coals on quality, blend them, and certify coke — three laboratories-in-one workflow on the same site.
Sulfur and ash drive both blend economics and coke specification, so coulometric and infrared methods may both be needed.
Ultimate analysis (C/H/N) supports coal-rank and blend modelling as well as coke characterization.
A planning template, not a fixed bundle. Final scope depends on sample types, throughput, target standards, utilities and local acceptance requirements.
20-position autosampler, 0.01–40% sulfur, coulometric titration.
RI-MAC6720-sample unattended TGA run of moisture, ash, volatile matter and fixed carbon.
RI-C5800Isoperibol gross calorific value, ≤11 min fast mode with automatic oxygen fill.
RI-CHN2200Carbon, hydrogen and nitrogen in ~300 s with 36-position autosampler.
RI-AF1600CCD image recognition of DT/ST/HT/FT up to 1600 °C with run video.
Method references describe the standards a model is listed against; the edition, clause and acceptance criteria in your tender are confirmed before order.
Issued to a partner who has passed our engineer training exam and been approved for the model list and territory. These are manufacturer documents, not a statement that a specific national approval has been granted.
Remote instrument training is free of charge and available for your team before or after delivery. Engineers who pass the exam at each level receive a certificate with a verification ID; a partner can then apply for authorization to perform first-line installation, commissioning and after-sales support in its territory, subject to our review.
Training, exam & partner authorizationA common starting configuration for coke & coking is RI-S320 (Coulometric Sulfur Analyzer), RI-MAC67 (Automatic Proximate Analyzer), RI-C5800 (Automatic Bomb Calorimeter), RI-CHN2200 (CHN Elemental Analyzer), RI-AF1600 (Ash Fusion Determinator). The final list depends on sample types, daily volume, target standards and available utilities — send those details for a written configuration review.
Yes. We can issue a manufacturer's authorization letter naming the tender reference and buyer, plus a technical and commercial responsibility statement, datasheets, acceptance-test procedure, training program and certificate samples. The exact document set must be confirmed against your tender clauses before submission.
We recommend a structured program: instrument operation and maintenance, method and calibration control, then competency assessment. Remote training is available for the whole team; on-site installation and training are quoted per project. Each participant who completes the program receives a certificate with a verification ID.
The methods most often named are ISO 351 / ASTM D4239 (sulfur); ISO 18806 / ASTM D5349 (coke sulfur, buyer to confirm); ASTM D7582 / ISO 18122 (proximate); ASTM D5373 (CHN); ISO 540 (ash fusion). Method compatibility is confirmed per model and per configured instrument — we do not treat a standard listed on a page as a blanket accreditation claim.